Siemens SITOP PSU8600 - View: State, Buffer Modules

Blocks of the library
5.3 Explanation of WinCC faceplates
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
55
Screen area
Parameter
Description
Output is in overload. (The output can
supply a higher current for a limited
amount of time or the output is in current-
limiting mode.) The diagnostic LED at
device or web server is flashing in varying
frequencies and can help determine the
type of overload.
Green, flashing
5.3.3
View: State, buffer modules
Screen: State of buffer module (100 ms/40 A and 300 ms/40 A)
Figure 5-24