Siemens SITOP PSU8600 - 6 Integrating the Library Contents; Working with the Library in SIMATIC STEP 7; Opening the Library in SIMATIC STEP 7

SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
61
Integrating the library contents
6
6.1
Working with the library in SIMATIC STEP 7
6.1.1
Opening the library in SIMATIC STEP 7
Procedure
Table 6- 1
Step
number
Instruction
1 Start the SIMATIC Manager.
2
Click "File > Open". The “Open Project” dialog box opens.
3 Click on the “Libraries” tab.
4
Click the “Browse” button, the “Browse” dialog box opens.
5
Select the storage location of the library from the drop-down list and then click “OK”. The library opens.