Siemens SITOP PSU8600 - Calling Blocks in SIMATIC STEP 7

Integrating the library contents
6.1 Working with the library in SIMATIC STEP 7
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
65
6.1.3
Calling blocks in SIMATIC STEP 7
Create global block with UDT structure
This global data block is interconnected at the respective “Data” input of the FBs.
Table 6- 3
Step
number
Instruction
1 Open your project and navigate to the "Blocks" folder. Right-click and select “Insert New Object > Data Block”.
"Properties - Data Block" dialog box opens.