Siemens SITOP PSU8600 - View: Alarms

Blocks of the library
5.3 Explanation of WinCC faceplates
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
60 Function Manual, 11.2017, A5E37764016-06-76
Elements
Table 5- 46
Screen area
Parameter
Description
Trend CNX8600 I
out
n Displays the time curve for the current of output n.
In the configuration, the time axis (x-axis) is 5 minutes by
default.
The Trend type is “Cyclical real time” and starts at the start
of HMI runtime.
A legend for assigning colors to the individual outputs is
located on the right side of the screen.
5.3.7
View: Alarms
Screen: Alarms
Figure 5-26
Elements
● Pending alarms
Displays the currently pending alarms.
● Alarm history
Displays the alarm's history.