Integrating the library contents
6.1 Working with the library in SIMATIC STEP 7
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
62 Function Manual, 11.2017, A5E37764016-06-76
Integrating the library blocks into SIMATIC STEP 7
Hardware used in this description:
● S7-300 CPU 317-2 PN/DP
● SITOP PSU8600
● MP 277 8“ Touch
The procedure for other SIMATIC S7-300/400 controllers is the same.
It is assumed that you have created your SIMATIC STEP 7 project and completed both
hardware and network configurations.
● Hardware configuration
– SITOP power supply (including the expansion modules)
– Controller
● Network configuration
– PROFINET connection between the controller and SITOP power supply
To Next Page
Loading...
