Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
46 Function Manual, 11.2017, A5E37764016-06-76
Structure of UDT_Buffering_OUT_V2 data type
Table 5- 39
Buffering disabled by inputs (0 = no, 255 = yes)
BYTE Buffer ready (0 = no, 255 = yes)
Charging state (0 to 100%)
FB SITOP_PSU8600_DIAG
Function principle
The Block reads diagnostic interrupt data when OB82 is triggered and raises alarm if module
address is equals to input “
Diag_Address”.
To Next Page
Loading...
