Siemens SITOP PSU8600 - View: State, Main Device

Blocks of the library
5.3 Explanation of WinCC faceplates
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
51
5.3.1
View: State, main device
Screen: State of main device
Figure 5-23
Elements
Table 5- 41
Screen area
Parameter
Description
PSU8600
information
Operating state and
<Text field>
The operating state displays various colors depending on the state of PSU8600.
The <text field> displays the operating state as plain text.
Text
Number
Color
Power supply system is switched off.
0
White
Power supply system was automatically switched
off due to operation under impermissible operating
conditions.
1 Red
The power supply system can be reactivated
again after automatic shutdown due to an error by
switching the supply voltage off and on.
2 Red, flashing
The power supply system is starting up; all out-
puts are still switched off.
3 White
The power supply system is in normal operation.
4
Green
A phase failure of the supply voltage was detect-
ed. The power supply system can continue normal
operation without restriction for a limited time.
5 Green, flashing
System overload within the permissible overload
profile detected; the power supply system contin-
ues to operate in normal mode.
6 Green, flashing