Siemens SITOP PSU8600 - Working with the Library in Wincc V7.4

Integrating the library contents
6.4 Working with the library in WinCC V7.4
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
94 Function Manual, 11.2017, A5E37764016-06-76
6.4
Working with the library in WinCC V7.4
To work with the library in WinCC V7.4 follow the similar process as mentioned in Working
with the library in WinCC V7.3 (Page 85), except opening the folder PSU8600 V2-3 library
WinCC V7.4 in place of PSU8600 V2-3 library WinCC V7.3.