Siemens SITOP PSU8600 - Connecting Trends of the Faceplates with Data Sources

Integrating the library contents
6.2 Working with the library in WinCC flexible
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
80 Function Manual, 11.2017, A5E37764016-06-76
6.2.4
Connecting trends of the faceplates with data sources
Procedure
Connect the trends to the data sources of the individual outputs. This graphically displays the
power consumption of the individual outputs over time.
Table 6- 8
Step
number
Instruction
1
Open the “PSU8600 V2-3 library WinCC flexible 2008” library in your project.
2 Navigate to open the "Communication > Tags" folders.
3
Select the “Trends” folder in the library and drag-and-drop it to "Tags" folder.
4
Open “Trends” folder that is inserted in step 3.
5 Change the DB number in the "Address" column of all the tags to the “PSU_Global” DB number.