Integrating the library contents
6.2 Working with the library in WinCC flexible
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
81
6 Select the faceplate in your screen and go to "Properties > General". Select the “PSUTrend” option and click
on the button (1) shown in figure below.
7 Add four trends by double clicking into the empty cell name.
• Select
trend points in the "Samples" column for the trend representation.
• Select "Trend type" as “Realtime Cyclic Triggered” for all trends.
To Next Page
Loading...
