Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
38 Function Manual, 11.2017, A5E37764016-06-76
FB SITOP_PSU8600_MU_S_V2
Function principle
This block is used for SITOP PSU8600 with single output only. The block reads the main
module specific data from the global DB for data exchange and outputs the data through its
output parameters.
On request, the block writes the main module specific data first into Cyclic Output Memory
area (if address is provided) and then into the PSU8600 device.
Figure 5-17
To Next Page
Loading...
