Siemens SITOP PSU8600 - Page 48

Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
48 Function Manual, 11.2017, A5E37764016-06-76
Function characteristics
Note
This Diagnostic block holds only 100 alarms of assigned PSU8600. If there are more than
100 alarms, new alarms will be discarded.
Input parameters
Table 5- 40
Parameter
Declaration
Data type
Description
Diag_Address
INPUT INT PROFINET diagnostic address of
the PSU8600 within the project.The
diagnostic address must be speci-
fied in decimal format.
MsgEvId001..MsgEvId100
INPUT DWORD Message event ids for Diagnostic
alarms.