Siemens SITOP PSU8600 - Page 67

Integrating the library contents
6.1 Working with the library in SIMATIC STEP 7
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76
67
Calling up blocks
Table 6- 4
Step
number
Instruction
1 Navigate to the block in which you wish to call the library blocks. In this example, it is “OB33”. Open it in the
FBD view.
2
In the “Program elements” tab, open the “FB blocks” folder.
3 Drag and drop the block “FB291 SITOP_PSU8600_V2 SITOP” into an empty network of “OB33”.