Integrating the library contents
6.2 Working with the library in WinCC flexible
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
84 Function Manual, 11.2017, A5E37764016-06-76
Note
Number of trends
You can add maximum of 8 trends for a fac
eplate. To monitor trends, you need to add trend
views in the screens and assign respective trend tags.
Note
Follow the same procedure for PSU8600 power supply with 1 output, for which only one
trend has to be created.
Displaying the PROFINET diagnostic alarms
In order to display the PROFINET diagnostic alarms of SITOP PSU8600 within the faceplate,
the respective WinCC flexible project must have already been configured for the display of
PROFINET diagnostic alarms.
Information on the display and configuration of diagnostic alarms in WinCC flexible is
available under the entry ID: 22533916
(https://support.industry.siemens.com/cs/ww/de/view/22319131
).
Further notes regarding the PROFINET diagnostic alarms of SITOP PSU8600 are available
in the PSU8600 User Manual.
To Next Page
Loading...
