Siemens SITOP series - Page 87

WinCC Faceplates
6.3 View: State, UPS8600
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
87
Screen: State when no battery is connected to UPS8600 module
Figure 6-7
Elements
Table 6- 7
Screen area
Parameter
UPS8600 battery summary information No information available.