Installing/mounting
2
2.1 Application Guidelines
Basic Requirements
● Avoid vertical pipes flowing in a downward direction.
● Select a location with the longest straight run of pipe.
● Identify upstream piping configuration (elbow, reducer, etc.).
● Avoid pressure reduction components upstream.
● Pipe must be full to achieve proper operation.
Note
Flow meter Application Data menu [Pipe Config] parameter is preset for [Fully Developed]
flow.
2.2 Mounting the Transmitter
WARNING
Hazardous Voltage
May cause death or serious personal injury.
Disconnect power before working on this product.
Wall Mounting
The transmitter can be mounted on any wall surface including wood, metal or concrete. Use
the appropriate bolts and screws as needed for your mounting application and adhere to
local codes. (See figure below for mounting bracket locations.)
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 1/2013, A5E02639182-AC
13
To Next Page
Loading...
