Siemens Sitrans F Series - 1 Introduction; Items Supplied

Introduction
1
This Quick Start is for Siemens SITRANS FUT1010 IP65 (NEMA 4X) liquid flowmeters. The
flowmeter includes the Transmitter and the Sensor Body with the TransLoc
TM
Mounting
System and is shipped with factory installed sensors and preset Site Setups.
NOTICE
The flowmeter menu parameters are pre-set at the factory.
It is not recommended to change the factory preset parameters or damage to the
equipment may occur.
If changes are desired, use care when changing Site Setup and Transducer Install menu
cells.
Note
This Quick Start applies to the following FUT1010 IP65 NEMA 4X operatin
g systems:
Version 3.03.00 and later / Version 5.03.00 and later.
1.1 Items supplied
● SITRANS F Flowmeter (Transmitter and Sensor Body)
● SITRANS F literature CD
● Quick Start
● For additional items refer to your packing slip.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 1/2013, A5E02639182-AC
5