Siemens Sitrans F Series - Figure 2-2 Sample Sensor Label

Installing/mounting
2.3 Sensor Label Information
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
16 Operating Instructions, 1/2013, A5E02639182-AC
WARNING
Hot Surface
External spool temperature can exceed 93°C (200°F). If this surface is contacted, the
potential for injury exists.
To reduce the risk of injury allow the surface to cool before touching.
WARNING
Sensor Failure
Exceeding rated pressure identified as MAOP may cause Sensor failure and the potential
for injury.
Check all pressure ratings before installing sensors.
)87
)ORZPHWHU6\VWHP
9ROXPHWULF0DVV
SENSOR P/N
S/N
TRANSMITTER P/N
S/N
WideBeam TRANSDUCER P/N
DOM
TEST PRESSURE (BAR)
DOT
IP65 / NEMA 4X
Assembled in U.S.A
STORAGE TEMP
OP TEMP
Min OP / MAOP
Qmin/Qmax
FLANGE DESIGN CODE
BODY DESIGN CODE
MAT BODY/FLANGE
WEIGHT
I.D .
METER SIZE / CL
Siemens Industry, Inc
Industry Automation
Spring House, PA
Hazardous information here.
May vary depending on model
purchased.
Tra ns Loc
SYSTEM P/N
A5E02639002 Rev.04
Install per Siemens Dwg. A5E02716838A
TM
TM
S/N
Figure 2-2 Sample Sensor Label