Siemens SITRANS FSS200 - Page 60

Connecting
5.4 Sensor wiring
FSS200 clamp-on sensors
58 Installation Manual, 08/2017, A5E36255466-AC
①
7ME39600CR series cable
③
Thermal couplant
②
Clamp-on temperature sensor
④
Pipe
⑤
Mounting assembly
Figure 5-6 Clamp-on temperature sensor
RTD cable to wall mount transmitter wiring
Note
RTD temperature sensor are for the FST030 only.
Note
RTD Channels 5 and 6
RTD sensors can be connected to Channel 5, Channel 6 or to both channels depending on
the application. The following example shows the RTD sensor connections to Channel 6.