Siemens SITRANS MAG 6000 I - Page 63

Power on transmitter
1.2.1 Transmitter OK Check application
Check installation/sensor/earthing connec‐
tion etc.
1.2.2 Check cables/connections OK ⇒ 1.2.1
Not OK ⇒ correct fault
2 Check cables/connections OK ⇒ 2.1
Not OK ⇒ Correct fault
2.1 Output readings OK? Yes ⇒ 2.1.1
No ⇒ 2.1.2.
2.1.1 Display defective Replace display
2.1.2 Transmitter defective Replace transmitter
Note
Sensor check list
Check lists for sensors are included in the respective sensor operating instructions.
Troubleshooting/FAQs
10.2 Transmitter check list
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
63