See also
Accessories (Page 77)
5.1.2 Mounting positions and mounting types
The device can be mounted horizontally or vertically on a DIN rail or to a wall.
Horizontal mounting position, rec‐
ommended
Vertical mounting position
Consider the permitted temperature range for operation that depends on the mounting position
in accordance with the Technical specications SITRANS CC220 (Page 69) chapter.
Clearances
Ensure that the following clearances measurements to another component or to a wall of a
housing are complied with:
• Below the device: ≥ 50 mm
• Above the device: ≥ 50 mm
Installing/mounting
5.1 Installation instructions SITRANS CC220
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA 25
To Next Page
Loading...
