Siemens SITRANS SCM IQ - Configuring Notifications

Procedure
1. Start SITRANS SCM IQ in MindSphere.
2. Navigate to the "Device con󹪝guration" tab.
3. Click "Connect device" or "Add sensors" on an existing gateway.
4. Select "Connect a new sensor" and choose an existing gateway from the drop-down menu.
5. Click "Next".
6. Enter a name and the MAC address for the sensor. You can 󹪝nd the MAC address on the
SITRANS MS200 nameplate.
7. To map the SITRANS MS200 to an asset in the MindSphere Asset Structure, click on "Browse"
at "Asset and position".
8. Choose an asset and enter additional information on the sensor position.
9. Click "Save".
Result
SITRANS MS200 will now be automatically assigned to the SITRANS CC220 and transfer data to
the chosen Asset of Asset type SITRANS MS200.
7.8 Con󹪝guring noti󹪝cations
Con󹪝gured users will receive noti󹪝cations when an anomaly is detected by the application. To
con󹪝gure the anomaly detection model please refer to Training anomaly detection models
(Page 47).
For more information, watch this video (https://www.youtube.com/watch?
v=AJLLbYmtN2A&t=352s).
Commissioning
7.8 Con󹪝guring noti󹪝cations
Smart Condition Monitoring with IIoT Sensors
44 Operating Instructions, 08/2021, A5E50573389-AA