Siemens SITRANS SCM IQ - Technical Specifications SITRANS MS200

Electromagnetic compatibility
Immunity to discharges of static elec‐
tricity
± 4 kV contact discharge in accordance with DIN EN 301489-4-2
± 8 kV air discharge in accordance with DIN EN 301489-4-2
Immunity to RF radiation 10 V/m, 80 MHz to 1 GHz, 80% AM in accordance with DIN EN
301489-4-3
3 V/m, 1.4 to 2 GHz, 80% AM in accordance with DIN EN
301489-4-3
1 V/m, 2 to 2.7 GHz, 80% AM in accordance with DIN EN
301489-4-3
10 V, 150 KHz to 80 MHz, 80% AM in accordance with DIN EN
301489-4-6
Wireless communication Bluetooth® (standard)
Wireless protocol Bluetooth® low energy (BLE) 5.1
Frequency range 2 400 ... 2 480 MHz
Max. transmit power +5.5 dBm
Max. receive sensitivity -103 dBm (BLE LR-125k)
Antenna rod antenna
Distance to SITRANS MS200 up to 30 m
Connected sensors up to 5
Data Transmission Cycle 1 per 100 seconds
11.2 Technical speci󹪝cations SITRANS MS200
General technical speci󹪝cations
Dimension (Diameter x Height) Ø 54 mm x 106 mm
Weight 334 g with battery pack
Power supply LTC (Lithium Thionyl Chloride) Battery pack
Voltage 3.6 V
Capacity 2.6 Ah
Lithium content 0.7 g
Weight of battery 18 g
Replaceable Yes, with same type
Communication
Data Transmission Cycle 1 per 100 seconds
Battery life at @ 25 °C up to 3.5 years, depending on signal strength
Environment
Storage temperature -40 ... 85 °C
Ambient temperature (operation) -30 ... 80 °C
Altitude Operation: -1000 ... 2000 m (pressure
795 ... 1080 hPa)
Rating IP68 (2 m, 24 h)
Technical speci󹪝cations
11.2 Technical speci󹪝cations SITRANS MS200
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA 71