Siemens SITRANS SCM IQ - 2 Introduction; Purpose of this Documentation; Document History; FW Revision History

Introduction
2
2.1 Purpose of this documentation
These instructions contain all information required to commission and use the devices. Read the
instructions carefully prior to installation and commissioning. In order to use the devices
correctly, 󹪝rst review its principle of operation.
The instructions are aimed at persons mechanically installing the devices, connecting it
electronically, con󹪝guring the parameters and commissioning it, as well as service and
maintenance engineers.
2.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remark
08/2021 First edition
2.3 FW revision history
SITRANS CC220
Firmware revision Date Changes
1.00.00 08/2021 Initial release
SITRANS MS200
Firmware revision Date Changes
1.0.0 08/2021 Initial release
2.4 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
speci󹪝cations (Page 69).
2.5 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA 9