SIVACON S8 Planning Principles – System-based power distribution
6
Fig. 1/3: Use of SIVACON S8 in power distribution
M M M
M
Power center
Main distribution
board
Subdistribution
boards
Motor
control
center (MCC)
Consumers load
Use
SIVACON S8 can be used at all application levels in the
low-voltage network (Fig. 1/3):
• Power center or secondary unit substation
• Main switchboard or main distribution board
• Subdistribution board, motor control center, distribution
board for installation devices or industrial use
Advantages of modular design
Every SIVACON S8 switchboard is manufactured of de-
mand-oriented, standardised, and series-produced mod-
ules. All modules are tested and of a high quality. Virtually
every requirement can be satisfied due to the manifold
module combination possibilities. Adaptations to new
performance requirements can easily and rapidly be imple-
mented by replacing or adding modules.
The advantages offered by this modular concept are clear:
• Verification of safety and quality for every switchboard
• Fulfilment of each and every requirement profile
combined with the high quality of series production
• Easy placement of repeat orders and short delivery time
To Next Page
Loading...
