10
SIVACON S8 Planning Principles – SIVACON S8 – System overview
2.1 System configuration and
cubicle design
When the system configuration is planned, the following
characteristics must be specified:
• Busbar position (top, rear top, rear bottom, or both rear
top and rear bottom)
• Single-front or double-front design
• Cable/busbar entry (from the top or bottom)
• Connection in cubicle (front or rear)
Tab. 2/2: Schematic overview of switchboard configurations for SIVACON S8
Busbar position
Top
Rear
Top Bottom Top and bottom
Single-front / double-front design
Single front Double front
Side of connection
Operating panel
B B B B
B B
B
B
B
A
To Next Page
Loading...
