Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
1.4 Pre-Requisites
Before reading this handbook, you should be familiar with the ST950 General
Handbook 667/HB/46000/000.
Anyone undertaking installation, commissioning and first line maintenance on the
ST950 family of controllers will also need the ST950 User Interface Handbook
(667/HU/46000/000) which provides details of how to connect to the controller and
the different user interfaces which are available. If the handset interface is chosen
to be used then the ST950 Handset Commands Handbook (667/HH/46000/000) will
also be required.
1.4.1 Qualifications
Only skilled or instructed personnel with relevant technical knowledge and
experience, who are also familiar with the safety procedures required when dealing
with modern electrical/electronic equipment, are to be allowed to use and/or work
on the equipment. All work shall be performed in accordance with the Electricity at
Work Regulations 1989 or the relevant local, state and government regulations.
Any personnel working on the ST950 family of controllers should have completed
the following training courses:
• HA Sector Scheme Sector 8 Modules 5XX
• M609 – Junction Traffic Controller Maintenance for ST950 / ST950ELV
Training requirements for non UK users may be different.
To Next Page
Loading...
