Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Each of the 32 outputs has an associated LED showing the status of that output.
The LED is tri-colour and should be the appropriate colour assigned to the output
(except during Self Test when all LED’s illuminate yellow).
Figure 25 – LSLS Card and Backplane
4.13.1 LSLS Outputs
The LSLS outputs can be configured to be lamp monitored. Typically, outputs that
drive Aspects, Pedestrian Waits, Pedestrian Red and Green Nearsides and
Demand/Wait Indicators can be lamp monitored. Outputs that drive Tactiles and/or
To Next Page
Loading...
