Siemens ST950 - Required Tools; Spares; Definitions

Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification
Unrestricted
Page
13 of 154
Version
7
Status
Issued
Last Editor
manpreet.jeerh
Date
January 2020
Document Name
ST950 ICM Handbook
Document No.
667/HE/45950/000
Copyright © Siemens plc 2020. All Rights Reserved. Mobility is a division of Siemens Plc
1.4.2 Required Tools
In addition to a standard Engineer’s tool kit, the following tools are required when
carrying out any work on the ST950 family of controllers.
User Interface
One of the following is required depending on the user interface chosen to be used
during the installation.
Description
Part Number
Compatible browser + USB cable (A to B)
Compatible terminal emulator + USB cable (A to B)
Netbook kit + USB cable (A to B)
667/1/32380/000
Serial handset Techterm + RS232 cable
667/4/13296/001
Old Oyster handset + RS232 cable
667/4/13296/000
Larger Screened Oyster handset + RS232 cable
667/4/13296/002
Cabinet Access
One or more of the following will be required to gain access to the controller
cabinet.
Description
Part Number
T-bar key
667/2/20234/000
S-18 key – Main Cabinet *
4/MC 289
Manual Panel key Type 900
667/4/13651/000
* - In some areas customers specified keys may be used
1.4.3 Spares
See the appendix for a full list of spares that are necessary when carrying out a site
visit to the controller, whether for installation, commissioning or maintenance.
1.5 Definitions
Item
Definition
Bit
Binary digit (i.e. `0’ or `1’)
Byte
Eight bit data array (i.e. bits 0-7, and 8-15 are bytes)
Configuration data
(aka Customer
Data) and site
specification
Data supplied by the customer as to how the controller is to
function. It is recommended that the Controller Forms
Handbook be used as the blank form for this.