Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
The 6U cards are held in the rack by a retaining strip at its upper front edge. To
release the cards, loosen the clamping screws and move the retaining strip clear of
the card guides.
For some cabinets additional kits of parts are available. These are listed on the
ST950ELV Family Tree (667/DZ/45950/000). The kits provide the necessary
installation instructions, brackets and other equipment that may be helpful during
the installation.
The standard controller items are used with these kits and are also listed in the
ST950 Family Tree. Refer to Siemens Poole for the latest copy.
Figure 4 – ST950 ELV 19” Rack - Front
To Next Page
Loading...
