3.3.2 Menu navigation
The following pictures demonstrate menu navigation with the example of adjusting
proportional band Xp for sequence 1 of control loop 1. The access level is set to
SERVICE. Starting point is the Info level.
Example
Display Procedure / result
SERVICE
PARA
SET
INFO
1. Press the OK button.
Result: First menu entry blinks, here
INFO (Inputs/outputs).
Note: Text in the information segment (here
VALUES) explains the active menu item (here
INFO).
SERVICE
PARA
SET
INFO
2. Press the " – " button to navigate to
menu entry PARA (parameterization).
Result: PARA blinks.
3. Confirm your selection by pressing the
OK button.
SERVICE
PARA
X5
1
X1
X2
2
X3
X4
MODE
3P
Result: Function block selection appears and
the first function block (X1) blinks.
SERVICE
PARA
X5
1
X1
X2
2
X3
X4
MODE
3P
4. Press the " – " button to navigate to
menu entry CTLOOP 1.
5. Confirm your selection by pressing the
OK button.
Result: Parameter selection appears
(see next picture).
SET
SERVICE
PARA
1
K
6. Press the " + " / " – " buttons to navigate
to the desired parameter (SEQ1 XP) and
press the OK button.
Result: Associated value (30.0) blinks.
7. Press the " + " / " – " buttons to adjust
the value, then press the OK button to
confirm.
22 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies Operation 29.08.2008
To Next Page
Loading...
