Siemens Synco 200 - 5 General Settings; Selecting the Unit; Device Information

5 General settings
5.1 Selecting the unit
At the service and password levels, you can switch the temperature unit between
°C/K and °F:
Setting values
Path: … > PARA > MODE
Display Name Range Factory setting
UNIT Unit °C, °F °C
5.2 Device information
You can view the SW version at the service and password levels:
Display values
Path: INFO
Display Name Comments
SW-VERS Software version
30 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies General settings 29.08.2008