Siemens Synco 200 - Page 35

6.3.1 Settings
Path: … > COMMIS > APPL ID
Configuration
Display Name Range / comments
ALM OFF Fan release relay Activation of relay output; adjustable values: ---,
Q1, Q2, … (free outputs only)
Path: INFO
Display values
Display Name Comments
ALM OFF Fan release relay YES = fan released / no alarm
(relay energized)
NO = fault status message (relay
deenergized) Fan OFF
Pfad: … > COMMIS > TEST
Wiring test
Display Name Positions
ALM OFF Fan release relay YES = fan released / no alarm
(relay energized)
NO = fault status message (relay
deenergized) Fan OFF
35 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies Operating modes 29.08.2008