7.4.7 Settings
Path: … > COMMIS > CONF > X1…X5
Configuration
Display Name Range / comments
LABEL Input identifier REMx
Path: … > PARA > X1…X5
Setting values
Display Name Range Factory setting
TYPE Type 0-10, OHM OHM
MIN VAL Value low −50…+500 0
MAX VAL Value high −50…+500 50
Path: INFO
Display values
Display Name Comments
Xx Xx Indication of present remote setpoint adjuster
value at terminal Xx
Path: … > COMMIS > TEST
Wiring test
Display Name Positions
Xx Xx Indication of present remote setpoint adjuster
value at terminal Xx, non-adjustable
Display Name Effect
Xx --- / ooo Sensor error X… Non-urgent alarm; plant not stopped
Fault status messages
48 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies Inputs 29.08.2008
To Next Page
Loading...
