Copyright © Sigicom AB 2021
G2. Example with other standards
Taking the example in G1 for the Standards 18A and 18B, DIN 4150-3,
the same principles will hold, but the two frequency weighting curves
(Drywall and Plaster) shall be replaced by the Zeile curves displayed in
Figure G2.
Figure G2. Frequency weighting curves for the standards S18A and
S18B (DIN 4150-3).
This figure is copied from a Transient report in INFRA Net, where the
different standard’s frequency weighting curves can be displayed.
To Next Page
Loading...
Need help?
General