Sigma 6-16S - 3 Safety; Marking of the Unit

Laboratory Centrifuge Sigma 6-16S
3 Safety
Version 07/2012, Rev. 1.22 of 08/05/2020 • sb
15 / 91
Translation of the original operating manual, part no. 0702002
→
3 Safety
→
3.1 Marking of the unit
The following symbols are used for all types of centrifuges manufactured by Sigma:
Dangerous voltage
I
On (Power)
Hot surface
0
Off (Power)
Caution! Risk of bruising
Name plate (see chapter
2.1.2 - "Name plate")
Protective earth (ground)
CE mark in compliance
with the directive
2006/42/EC
Earth (ground)
Do not dispose as part of
domestic waste
g-lock
®
-System installed
Unplug the mains plug
Arrow indicating the
direction of rotation
GS mark (tested safety;
only for Germany)
4°C Guarantee
NRTL mark (only for the
USA and Canada)
Centrifuge with heating
system
RCM mark
(only for Australia)
Rotor loading information
(see chapter 6.2.2.3 -
"Installation of
accessories")
China RoHS 2 mark
(only for China)