Sigma 6-16S - Options for Data Input and Output; Switching the Centrifuge off

Laboratory Centrifuge Sigma 6-16S
6 Using the centrifuge
56 / 91
Version 07/2012, Rev. 1.22 of 08/05/2020 • sb
Translation of the original operating manual, part no. 0702002
→
6.3.4 Options for data input and output
• Connection for a serial interface (depending on the centrifuge type,
partly standard).
• External signal active DC 24V, 0.5 A max. (part no. 17701)
• Floating switch AC 250V max., 6 A (part no. 17702)
→
6.4 Switching the centrifuge off
• Open the centrifuge when it is not in use so moisture can evaporate.
• Switch the centrifuge off by pressing the mains power switch.