Sigma 6-16S - 10 Technical Data; Ambient Conditions

Laboratory Centrifuge Sigma 6-16S
10 Technical data
Version 07/2012, Rev. 1.22 of 08/05/2020 • sb
71 / 91
Translation of the original operating manual, part no. 0702002
→
10 Technical data
→
Manufacturer
Sigma Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Type:
6-16S
Connection requirements
Electr. connection:
Protection class:
IP code:
see name plate
I
20
Power consumption (kW):
Input fuse (AT):
1.3
16.0 (at 220-240 V / 50 Hz),
temperature fuses
Performance data
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kin. energy (Nm):
13,500
3,200
20,376
105,901
Other parameters
Time range:
Storage locations:
10 sec – 99 h 59 min,
short run, continuous run
60
Physical data
Height (mm):
Height with open lid (mm):
Width (mm):
Depth (mm):
Weight (kg):
483
990
581
711
116
Noise level (dB(A)):
< 73 (at maximum speed)
10.1 Ambient conditions
• The figures are valid for an ambient temperature of +23°C and a
nominal voltage  10 %.
NOTE
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
• For indoor use only.
• Allowable ambient temperature +5°C to +40°C.
• Max. allowable relative humidity of air 80% from 5°C up to 31°C with a
linear decrease to 50% relative humidity of air at 40°C.
• Maximum altitude 2,000 m above sea level.