Laboratory Centrifuge Sigma 6-16S
Version 07/2012, Rev. 1.22 of 08/05/2020 • sb
Translation of the original operating manual, part no. 0702002
3.6.7.2 Marking
During production, every rotor and bucket receives a batch number
enabling conclusions to be drawn concerning the production process and
the subsequent quality inspection. Some rotors also have an additional
serial number providing further detailed information.
The batch number and serial number is engraved on the rotor as follows:
1 Batch number
2 Serial number
Fig. 5: Rotor with an engraved batch number and serial number (example)
If there are any enquiries concerning the rotor, please state the batch
number and serial number!
To Next Page
Loading...
