Sigma 6-16S - Page 31

Laboratory Centrifuge Sigma 6-16S
6 Using the centrifuge
Version 07/2012, Rev. 1.22 of 08/05/2020 • sb
31 / 91
Translation of the original operating manual, part no. 0702002
Removing a rotor
• Loosen the rotor tie-down screw anti-clockwise and remove the rotor
together with the lid.
• Loosen the lid by turning it anti-clockwise and then remove it.
1 Rotor tie down screw
2 Lid
3 Rotor
Fig. 7: Angle rotor with a hermetic lid