Sigma DP1 Merrill - Setting the Language

25
SETTING THE LANGUAGE
You should receive the DP1 Merrill camera pre-set to English,
however, if necessary, you can change the camera language
yourself.
1
Turn the camera on.
2
Press the button on the back of the
camera to display the Camera Set-up
Menu. (See P. 2 8 )
3
Select [ Camera Settings (3)] by
rotating the Command Dial.
4
Use the buttons to select [Language/
ᚕᛖ].
5
Press the or
button to open the
language set-up page.
6
Use the buttons to select the
desired language.
7
Press the button to apply the setting
or the
button to return to the
language set-up page without making
any changes.