SIGMATEK SCP 111 - Label Field

S-DIAS SAFETY CPU MODULE SCP 111
04.11.2020 Page 21
5.1 Status LEDs
The LED display lights continuously to indicate that the in- and outputs are active.
RUN
green
RUN
Indicates
- The time-limited (LED "S" on) operation mode or
- Or unlimited time ("S" LED off) operation mode.
Module
Status
yellow
status
- Lights permanently: the module is in service mode
- Slow blinking frequency: the module is currently in
Idle or Check Configuration mode (distribution of
the configuration)
Error
red
Error
- Lights permanently: the module is in error mode
- Slow blinking frequency: the maximum age has
been exceeded for a removed input (can be read
with the SafetyDesigner)
- Fast blinking frequency: serious error;
communication with the module is no longer
possible (CANNOT be read with the
SafetyDesigner)
B
red
Display validation button S1
See chapter "Validation Button" for description
C1
yellow
Command 1
See chapter "Validation Button" for description
C2
yellow
Command 2
See chapter "Validation Button" for description
C3
yellow
Command 3
See chapter "Validation Button" for description
Safety
Interface
active
yellow
Safety Interface connection
Indicates an active Safety Interface
DC OK
green
DC OK +24 V
Signals the availability of the supply voltage