SCP 111 S-DIAS SAFETY CPU MODULE
Page 20 04.11.2020
5 Connector Layout
The connections of the +24 V supply (X3: pin 1 and pin 2) or the GND supply (X3: pin
3 and pin 4) are internally bridged. To supply the module, only one connection to a
+24 V pin (pin 1 or pin 2) and a GND pin (pin 3 or pin 4) is required. The bridged
connections may be used for further looping of the +24 V supply and the GND
supply. However, it must be taken into account that a total current of 6 A per
connection is not exceeded by the forward looping!
To Next Page
Loading...
