SIGMATEK SCP 111 User Manual

S-DIAS SAFETY CPU MODULE SCP 111
04.11.2020 Page 35
8 Wiring Guidelines
The input filters, which suppress noise signals, allow operation in harsh environmental
conditions. A careful wiring method is also recommended to ensure error-free function.
The following installation guidelines should be observed:
• Avoid parallel connections between input lines and load-bearing circuits.
• protective circuits for all relays (RC networks or free-wheeling diodes)
• correct wiring to ground
The ground bus should be connected to the control cabinet when possible!
Wiring and mounting must be performed with no voltage applied!
Le câblage et l'installation ne doivent être effectués que sur un système hors
tension !
IMPORTANT:
The S-DIAS module cannot be connected/disconnected while voltage is applied!

SIGMATEK SCP 111 Specifications

General

Brand	SIGMATEK
Model	SCP 111
Category	Control Unit
Language	English