S-DIAS SAFETY CPU MODULE SCP 111
04.11.2020 Page 55
None of the nodes could assume the FlexConHost role in this example.
Here it must be noted (as with optional interface connections) in the LASAL that a timeout is
set for connections that are not required for operating the machine after the connection setup
to external safe participants has been aborted.
This setting can be made directly at the PLC in the hardware editor in ms and can be set to
1 for FlexCon connections (at 0, the connection to all participants would be waited for). For
optional interface connections, this timeout time can be used to take into account different
start-up times of the connected systems.
To Next Page
Loading...
