SIGMATEK SCP 111 - Page 62

SCP 111 S-DIAS SAFETY CPU MODULE
Page 60 04.11.2020
Documentation Changes
Change date
Affected
page(s)
Chapter
Note
08.07.2015
11
3.2 Electrical Requirements
Added note
04.08.2015
Info Cover Translation from German added
15.10.2015
11, 12
3.2 Electrical Requirements
Table split
20.01.2016
11
3.2 Electrical Requirements
updated
21.01.2016
12
3.3 Miscellaneous
Standard changed
11.03.2016
9
3.2 Electrical Requirements
Note Safety error added
28.04.2016
32
10 Mounting
Graphics distances
27.06.2016
CAN -> Safety Interface
17.08.2017
14
18
3.4 Environmental Conditions
5.2 Applicable Connectors
Added operating conditions
Sleeve length added
Added info regarding ultrasonically welded strands
18.10.2017
19
33
5.3 Label Field
10 Mounting
Added chapter
Graphic replaced
19.06.2018
12
3.2.1 Module Supply
Note UL conditions
20.09.2018
5 Connector Layout
Note added
02.04.2019
10
16
all
2.3 Safety-Relevant
Parameters
3.4 Environmental Conditions
Correction of the safety-relevant parameters
Corrections environmental conditions
Corrections due to CE
30.07.2019
16
3.4 Environmental Conditions
Indoor use deleted
01.10.2019
13
3.2.2 S-DIAS Bus/Safety
Supply
Footnote 4 updated
14.11.2019
10 Supported Cycle Times
Chapter added
02.12.2019
2.3 Safety-Relevant
Parameters
Values updated
28.02.2020
36
10 Supported Cycle Times
Text adapted
20.07.2020
all
Up to 60 °C ambient temperature