SIGRIST LabScat 2 - General Safety Points; Operational Dangers and Residual Risks

Instruction Manual LabScat 2 General safety points
16 12112E/2
3.2 Residual risk
WARNING!
According to the risk assessment of the applied safety directive DIN EN 61010-1,
there remains the risk of a faulty measuring value display. This risk can be reduced
with the following measures:
 Use an access code to prevent unauthorized persons from changing parameters.
 Perform the specified servicing duties.
3.3 Warning and danger symbols on the instrument
WARNING!
There are no warning or danger symbols on the instrument.
Users must ensure that they observe the safety measures as specified in the Instruction Man-
ual at all times when working with the instrument and its peripheral equipment.
The following sections must be internalized:
 Section 1.11
 Section 1.12
 Section 1.13
 Section 3.1
 Section 3.2
 Observe safety pointers when performing the described procedures.
 Observe local safety pointers.