SIGRIST LabScat 2 - Setting the Date and Time

Settings Instruction Manual LabScat 2
12112E/2 37
8.4 Setting the date and time
MANIPULATION
ADDITIONAL INFO / IMAGES
1.
Press the Menu button.
2.
Set the access code and confirm with OK.
Factory setting is 0.
3.
Press the Configuration button.
If the desired menu does not
appear, press the arrow bottom
right.
4.
To enter the time, press the currently displayed
time at the Time menu item and enter the
new time with the number pad.
Confirm entry with OK.
The time must be entered in the
format hh:mm.
5.
To enter the date, press the currently displayed
date at the Date menu item and enter the new
date with the number pad.
Confirm entry with OK.
The date must be entered in the
format selected under the Date
format menu item.
6.
Press the Meas button.
Instrument again in normal opera-
tion.