SIGRIST LabScat 2 - View Measurement Counter; Working with a USB Keyboard or Barcode Reader

Settings Instruction Manual LabScat 2
12112E/2 39
8.7 View measurement counter
MANIPULATION
ADDITIONAL INFO / IMAGES
1.
Press the Menu button.
2.
Set the access code and confirm with OK.
Factory setting is 0.
3.
Press the System info button.
If the desired menu does not
appear, press the arrow bottom
right.
4.
Press the down arrow key.
5.
Read the measurement counter.
6.
Press the Meas button.
Instrument again in normal opera-
tion.
8.8 Working with a USB keyboard or barcode reader
The keyboard or barcode reader can be used for all text entry fields (names, units, figures).
Connection to the LabScat 2 can be made as follows:
MANIPULATION
ADDITIONAL INFO / IMAGES
1.
Connect the keyboard/barcode reader to the
USB interface.
2.
The connection to the device is confirmed
when USB is shown in the information field at
the top right.
The measurement can be started with
the F1 key.