SIGRIST LabScat 2 - 8 Settings; Setting the Operating Language

Instruction Manual LabScat 2 Settings
34 12112E/2
8 Settings
8.1 Setting the operating language
MANIPULATION
ADDITIONAL INFO / IMAGES
1.
Press the Menu button.
2.
Set the access code and confirm with OK.
Factory setting is 0.
3.
Press the Configuration button to access lan-
guage selection.
If the desired menu does not
appear, press the arrow bottom
right.
4.
Press language field (circle). The list of all lan-
guages appears (factory setting is English).
5.
Apply the desired language by pressing the
corresponding field, or press the ESC button to
cancel.
6.
Press the Meas button.